How to get IP Address from PAX?

Here are steps on how to retrive IP Address from your PAX EMV Device

SP30

Log into the Pax SP30 to retrieve the IP address assigned for the Pax SP30:
On the SP30 press the Blue "F" then Enter/Green button then it will ask you for a password. The password by default is the current date entered in (mm/dd/yyyy) format, then Enter/Green.
Press the number 6 to go into "Communications", enter password. The password by default is the current date entered in (mm/dd/yyyy) format.
Enter 7 to Select LAN Parameters from the Communication Options.
Enter 2 to go to the IP Address. Write down the IP Address displayed in the screen, you will need it to configure the Pax SP30 to POS
Press the Red button to go back out of LAN Parameters
Next you go into ECR Comm. Type - From the Communication Options, select 8.
Press 2 to go into Ethernet. There you will get your Communication Port number. Write down the Communication Port number, you will need it to configure the Pax SP30 to POS.
Press the Green button to get to the Communication Protocol : 2 screen then you press the 2 to select HTTP GET.
Once you set the Communication Protocol to HTTP GET and get the IP Address and Communication Port. You are now ready to configure it with the POS.

MT30

Log into the Pax MT30 to retrieve the IP address assigned for the Pax MT30:
On the MT30 press the Enter/Green button then it will ask you for a password. The password by default is the current date entered in (mm/dd/yyyy) format, then Enter/Green.
Press the number 6 to go into "Communications", enter password. The password by default is the current date entered in (mm/dd/yyyy) format.
Select LAN Parameters from the Communication Options.
Enter 2 to go to the IP Address. Write down the IP Address displayed in the screen, you will need it to configure the Pax MT30 to POS
Press the Red button to go back out of LAN Parameters
Next you go into ECR Comm. Type - From the Communication Options
Press 4 to go into Ethernet. There you will get your Communication Port number. Write down the Communication Port number, you will need it to configure the Pax SP30 to POS.
Press the Green button to get to the Communication Protocol : 2 screen then you press the 2 to select HTTP GET.
Once you set the Communication Protocol to HTTP GET and get the IP Address and Communication Port. You are now ready to configure it with the POS.

Last updated 5 years ago

Was this helpful?

Here are steps on how to retrive IP Address from your PAX EMV Device

SP30

Log into the Pax SP30 to retrieve the IP address assigned for the Pax SP30:
On the SP30 press the Blue "F" then Enter/Green button then it will ask you for a password. The password by default is the current date entered in (mm/dd/yyyy) format, then Enter/Green.
Press the number 6 to go into "Communications", enter password. The password by default is the current date entered in (mm/dd/yyyy) format.
Enter 7 to Select LAN Parameters from the Communication Options.
Enter 2 to go to the IP Address. Write down the IP Address displayed in the screen, you will need it to configure the Pax SP30 to POS
Press the Red button to go back out of LAN Parameters
Next you go into ECR Comm. Type - From the Communication Options, select 8.
Press 2 to go into Ethernet. There you will get your Communication Port number. Write down the Communication Port number, you will need it to configure the Pax SP30 to POS.
Press the Green button to get to the Communication Protocol : 2 screen then you press the 2 to select HTTP GET.
Once you set the Communication Protocol to HTTP GET and get the IP Address and Communication Port. You are now ready to configure it with the POS.

MT30

Log into the Pax MT30 to retrieve the IP address assigned for the Pax MT30:
On the MT30 press the Enter/Green button then it will ask you for a password. The password by default is the current date entered in (mm/dd/yyyy) format, then Enter/Green.
Press the number 6 to go into "Communications", enter password. The password by default is the current date entered in (mm/dd/yyyy) format.
Select LAN Parameters from the Communication Options.
Enter 2 to go to the IP Address. Write down the IP Address displayed in the screen, you will need it to configure the Pax MT30 to POS
Press the Red button to go back out of LAN Parameters
Next you go into ECR Comm. Type - From the Communication Options
Press 4 to go into Ethernet. There you will get your Communication Port number. Write down the Communication Port number, you will need it to configure the Pax SP30 to POS.
Press the Green button to get to the Communication Protocol : 2 screen then you press the 2 to select HTTP GET.
Once you set the Communication Protocol to HTTP GET and get the IP Address and Communication Port. You are now ready to configure it with the POS.

Last updated 5 years ago

Was this helpful?